2006 Arctic Cat DVX 400 Service Manual, Page 72Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 72

1Install the spacer (3) into the oil ring groove; then install the two side rails (4)NOTE: The spacer and side rails do not
(2) rings differ in shapeInstall the rings with the mark directed up 5Apply engine oil to the sliding surface of the piston
and the big end of the connecting rod; then install the alignment pins (2) and new gasket (3) onto the crankcase 2Install
the second ring (2); then install the first ring (1) SP258 ATV2175 3Apply engine oil onto the piston pin and the small end
of the connecting rod 6Position each piston ring correctly and work the cylinder down onto the piston making sure the rings