2006 Arctic Cat DVX 400 Service Manual, Page 73Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 73

CCylinder Head DCamshafts EValve Cover FCam Chain Tensioner NOTE: Steps 1-7 of the preceding sub-section must precede this
the cam drive chain sprocket and the crankcase when the crankshaft is rotated 10Tighten the two mm cap screws (1) and cylinder
nuts (2) to specifications 7Install the cam chain guide (1) ensuring that the guide is installed properly; then install the
alignment pins (2) and new gasket (3) 11Turn the rotorflywheel until the "T" line on the rotor is aligned with the center