2006 Arctic Cat DVX 400 Service Manual, Page 75Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 75

NOTE: Do not apply engine oil to rubber cushion (2) SP267 19Install new gasket and the cam chain tensioner assembly into
2Install the mounting fasteners securing the enginetransmission in the following sequenceALower rear: One cap screw and nut
with two spacersTighten only until snugBUpper rear: Loosely fasten the engine mount-to-frame cap screws; then install the
cap screw wnut and flat washerTighten only until snugCLower front: One cap screw, nut, spacer, and washerTighten only until
snug 21Adjust the valve clearance at this timeSee Section 222Wipe all oil from the mating surfaces of the valve cover and
cylinder head; then apply Three Bond Sealant (pn 0636-070) to the mating sufaces23Apply engine oil to both sides of the washers