2006 Arctic Cat DVX 400 Service Manual, Page 85Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 85

Fuel Valve The fuel valve is on the gas tankThere are three positions: ON, RES (reserve), and PRI (primer) 6Remove the gas
desiredNOTE: The fuel valve is an automatic-off diaphragm styleFuel will flow only when the engine is being started or when
it is running; however, in the prime position, fuel will flow unrestricted to the carburetor 1Place the gas tank into position
on the frame; then install the cap screwsTighten securely; then install the snorkel2Connect the hose from the carburetor;
then secure hose to cables and hoses with cable tie3Connect the vacuum hose to the fuel valve4Install the vent hose; then
fill the gas tank with gasoline5Turn the fuel valve to the PRI position and inspect for leakageTurn the fuel valve to the
ON position after checking for leaks6Install the body and secure the mounting brackets to the frame; then install the seat
and make sure it locks securely ! WARNING Leaving the fuel valve in the "PRI" position when the engine is off can be hazardousThe