2006 Arctic Cat DVX 400 Service Manual, Page 88Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 88

INSTALLING 1Ensure that the tank mounting isolators are serviceable; then install the tank onto the frame and tighten the
daily for leakage and damageAlso, the coolant level should be checked periodicallyWhen filling the cooling system, use premixed
Arctic Cat Antifreeze (pn 0638-395)While the cooling system is being filled, air pockets may develop; therefore, run the
engine for five minutes after the initial fill, shut the engine off, and then fill the cooling system to the bottom of the
stand pipe in the radiator neckSP292 3Fill the oil tank with the correct amount of recommended engine oilSee Section 24Install
the radiator (see Radiator in this section) and fill the cooling system5Install the body (see Section 8); then install the