2006 Arctic Cat DVX 400 Service Manual, Page 93Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 93

Engine Coolant Temperature Switch REMOVING Cooling Fan Thermo-Switch REMOVING 1Drain the coolant in the radiator to point
see Section 5 INSTALLING Installing 1Apply engine coolant to the O-ring; then install the engine coolant temperature switch
and tighten to specifications (see Section 10)2Connect the lead wire coupler; then fill the cooling system with recommended
coolant3Start the engine and check for coolant leaks; then shut the engine off and check coolant level in the overflow tankCoolant
should be between upper and lower level marks 1Apply engine coolant to the O-ring; then install the cooling fan thermo-switch
and tighten to specifications (see Section 10)2Connect the lead wire coupler; then fill the cooling system with recommended