2006 Arctic Cat DVX 400 Service Manual, Page 101Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 101

NOTE: If the meter shows more than ohm of resistance, troubleshoot or replace the switchcomponent, the connector, or the
show less than ohm4With the starter button released, the meter must show an open circuitNOTE: If the meter does not show
as specified, replace the switchcomponent, connector, or switch harnessSP081A 2Set the meter selector to the OHMS position;
then connect the black meter lead to the black wire and the red meter lead to the blue wire3With the transmission in neutral,
the meter should show less than ohm4Depress the gear shifter pedal to engage first gearThe meter should show an open circuit5Connect
the red meter lead to the white wireThe meter should show less than ohm6Rotate the reverse selector knob clockwise and depress
the gear shifter pedal to engage reverse gear; then connect the red meter lead to the red wireThe meter must show less than
ohm7Lift the gear shifter pedal twice to return to neutralThe meter must show an open circuit RESISTANCE (Emergency Stop)