2006 Arctic Cat DVX 400 Service Manual, Page 113Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 113

Rear Drive Axle REMOVING 1Secure the ATV on support stand to elevate the rear wheels ! WARNING Make sure the ATV is solidly
pedal with the caliper removedThe brake piston will be pushed out and brake fluid will be spilled 6Slide the axle to the
right and out of the axle housing; then remove the brake disc from the flange NOTE: It is not necessary to remove the right-side
axle nut 4Remove the rear wheel hubs; then remove the left-side axle nuts (1)Account for two concave washers (2)SP317 NOTE:
Do not attempt to remove the brake disc flangeThe axle and brake flange are an assembly 7Remove the four swing-arm cap screws;