2006 Arctic Cat DVX 400 Service Manual, Page 119Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 119

! WARNING Direct the valve stem away from your bodyAlways wear protective eyewear when releasing high-pressure gas INSTALLING
shock bodies, and eyelets for cracks, leaks, and bends 3Remove the ATV from the support standADJUSTING SPRING PRELOAD The
preload is adjustable by changing the spring set lengthUsing the following procedure, adjust the spring1Loosen the lock nut
(1); then adjust the spring set length by turning the adjuster (2) ! WARNING Do not attempt to disassemble the shock absorbersThey
contain high-pressure nitrogen gas and are not serviceable NOTE: Do not dispose of shock absorber until the high-pressure
nitrogen gas is released RELEASING GAS PRESSURE Remove the valve cap; then using screwdriver, depress the valve releasing