2006 Arctic Cat DVX 400 Service Manual, Page 141Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 141

MeasuringAdjusting Toe-InToe-Out 1With the ATV on level surface, center the handlebar for straight ahead using suitable means
then subtract distance (B) from (A)DistanceDistanceToe-InSP421 13Install the throttle lever case to the handlebar aligning
the housing mating surface with the punch mark (F); then tighten the throttle case screws securelyATV2205 4Adjust toe-in
to mm (0.20 in; then measure distances (C) and (D)Distances (C) and (D) should be equalATV2203 14Install the brake master
cylinder and check for proper fluid levelSee Section 2 5After all the adjustments are to specifications, tighten the tie-rod
lock nuts to specifications (see Section 10)NOTE: Prior to locking the jam nuts, make sure the ball joints are at the center