2006 Arctic Cat DVX 400 Service Manual, Page 149Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 149

3Remove the cap screw, lock washer, and washer securing the actuator arm to the throttle control lever SP435 5Install the
1Remove the two machine screws securing the throttle control to the handlebar INSTALLING 1Place the return spring into the
throttle control; then place the bushing and actuator arm into positionSecure with the cap screw, lock washer, and washerAL610D
2Slide the grommet out of the lower half of the throttle control; then remove the cable from the actuator arm 2Using pair