2006 Arctic Cat DVX Utility 250 Service Manual, Page 23Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 23

CHECKINGREPLACING FRONT PADS The clearance between the brake pads and brake discs is adjusted automatically as the brake
new brake pads; then install the two brake pad alignment pins 4To replace the brake pads, use the following procedureAWith
the wheel removed, remove the brake pad alignment pins from the caliper; then remove the mounting cap screws DSpread the
brake pads and place the brake caliper over the discSecure with the mounting cap screwsTighten the cap screws to specifications;
then tighten the alignment pins to specifications 5Install the wheelTighten to specificationsKM266A 6Burnish the brake pads