2006 Arctic Cat DVX Utility 250 Service Manual, Page 40Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 40

Left-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
cover cap screwsRemove the recoil starter assembly noting the location of the dowel pinsNote the condition of the recoil
cover gasketReplace if damaged AT THIS POINT To service the recoil starter, see Servicing Left-Side Components sub-section
4Hold the centrifugal clutch with suitable holder; then remove the clutch retaining nut and clutch collar BV-Belt Cover CDrive
Pulley DDriven PulleyCentrifugal Clutch Assembly NOTE: On the Utility model, step in the preceding sub-section must precede
this procedure 2Remove the ten cap screws securing the V-belt cover; then remove the cover noting the location of the two
dowel pinsNote the condition of the V-belt cover gasketReplace if damaged 5Remove the outer clutch housing; then remove the