2006 Arctic Cat DVX Utility 250 Service Manual, Page 43Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 43

ATransmission (Utility Model) 1Drain the transmission lubricant into suitable container; then install the drain plug and
components are removed, install the centrifugal clutch housing on the driveshaftIf the left-side components have not been
removed, see Removing Left-Side Components in this sectionRemove only the V-belt coverKM646A 3Remove the three cap screws
securing the secondary drive bevel gear cover; then remove the coverAccount for gasket 6Remove the eight cap screws securing
the transmission case cover to the transmission case; then remove the coverAccount for gasket (A), the secondary drive bevel
gear, washer (B), and two alignment pins (C) 4Remove the speedometer gear retainer nut, washer, and speedometer gear Back