2006 Arctic Cat DVX Utility 250 Service Manual, Page 47Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 47

18Remove the two cap screws securing the oil pump to the crankcase and remove the oil pump Center Crankcase Components NOTE:
Crankcase Halves 16Remove the two cap screws securing the oil baffle to the crankcase and remove the baffle; then remove
the circlip securing the oil pump driven sprocket 1Remove the left-side and right-side cap screws securing the crankcase
halves noting the position of the different-sized cap screws for joining purposes KM720A KM428 2Using Crankcase SeparatorCrankshaft
Remover (pn 0444-009) and tapping lightly with rubber mallet, separate the crankcase halvesAccount for two alignment pins