2006 Arctic Cat DVX Utility 250 Service Manual, Page 55Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 55

6Remove the spiral spring from the case by lifting the spring end up and outHold the remainder of the spring with thumbs
taken when lifting the reel free of the caseWear safety glasses to avoid injury AssemblingInstalling 5Remove the protective
cover from the starter handle and pull the rope out of the handle; then untie the knot in the rope and remove the handleAccount
for flat washer 1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting
lug in the case; then wind it in counterclockwise direction until the complete spring is installedNOTE: The spiral spring
must seat evenly in the recoil case NOTE: Do not remove the spiral spring unless replacement is necessaryIt should be visually
inspected in place to save timeIf replacement is necessary, follow steps 6-7 2Insert the rope through the hole in the reel