2006 Arctic Cat DVX Utility 250 Service Manual, Page 67Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 67

11Install the lowreverse shift fork into the lowreverse clutch dog; then install the shift cam into the transmission case
and plugTighten to specifications 16Install spacer washer and the drive bevel gear on the driveshaft; then while holding
the centrifugal clutch housing with an appropriate holder, secure the bevel gear with new nut and tighten to specifications
17Use center punch to stake the nut to the driveshaftKM619A 14Install the shift shaft making sure to align the timing mark
between the two marks on the shift cam 18Apply clean engine oil to new O-ring and install in the groove of the secondary
driven bevel gear housing; then with the index marks aligned, install the secondary driven bevel gear assembly in the transmission