2006 Arctic Cat DVX Utility 250 Service Manual, Page 68Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 68

19Loosely secure the secondary driven bevel gear assembly using the four cap screws; then using crisscross pattern, tighten
until snug Assembling Crankcase Half NOTE: For ease of assembling, install components on the left-side crankcase half NOTE:
Rotate the crankshaft back and forth to ensure no binding or sticking occurs while tightening the cap screws To assemble
center crankcase components, install the balance shaft into the left-side crankcase half; then align the timing mark on the
balance shaft with the timing mark on the crankshaftInstall the crankshaftMD1008 4From the left side, install the remaining
crankcase cap screws; then tighten only until snugNOTE: Rotate the crankshaft back and forth to ensure no binding or sticking