2006 Arctic Cat DVX Utility 250 Service Manual, Page 73Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 73

Installing EngineTransmission DVX Model NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing
and nutsFinger tighten only4Remove the engine lift from the front mounting boss; then install the left and right engine mounting
brackets and attach with the existing hardwareFinger tighten only 11Install the cam chain tensioner cover bolt and tighten
to specifications12Check that the cam gear alignment marks are correctly oriented; then install and tighten the external
cylinder head to cylinder cap screws to specifications13Install the cylinder head cover with new O-ring and tighten securely
5Install the front engine through-bolt and nut; then tighten the engine mount bracket screws to specifications6Tighten the
engine through-bolt nuts to specifications7Connect the shift linkage to the shift arm and tighten the nut securely8Install