2006 Arctic Cat DVX Utility 250 Service Manual, Page 82Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 82

9Inspect tips of the jet needle, pilot screw, and the inlet needle valve for wear, damage, or distortion10Inspect the slow
gas tank valve, tank cap, and tank for leaks, holes, and damaged threads4Inspect the gas gauge for proper operation Gas Tank
! WARNING Whenever any maintenance or inspection is made on the fuel system during which there may be fuel leakage, there
should be no welding, smoking, open flames, etc in the area INSTALLING 1Place the gas tank into position on the frame; then
install the cap screwsTighten securely2Connect the gas hose from the carburetor; then secure hose to cables and hoses with
cable tie3Install the vent hose; then fill the gas tank with gasoline4Turn the gas tank valve to the ON position and inspect
for leakage5Install the seat REMOVING 1Turn the gas tank valve to the OFF position2Remove the seat3Disconnect the hose from