2006 Arctic Cat DVX Utility 250 Service Manual, Page 92Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 92

Spark Plug Cap TESTING NOTE: If any functions (segments or displays) are not normal or do not display as indicated, the LCD
the instrument pod; then turn the instrument pod over to access the indicator lights2Remove the light to be tested by pulling
the bulb socket from the light pod; then remove the bulb from the socketNOTE: Bulbs must be checked by switching to position
where the bulb is illuminatedPower to the indicator light may be verified by installing working light bulb in that position
4Connect the red MaxiClip to the bluered wireThe reverse indicator light (10) must illuminate5Connect the red MaxiClip to
the whitered wireThe low range light (3) must illuminate6Connect the red MaxiClip to the greenblue wireThe temperature indicator
(4) must indicate hot (all indicator segments visible) and begin flashingThe thermometer icon will also flash7Connect the
red MaxiClip to the yellowwhite wireThe fuel quantity indicator (8) must sequence (one segment every 8-10 seconds) until
the bottom segment begins flashingAfter flashing for 8-10 seconds, the bottom segment will extinguish and the gas pump icon