2006 Arctic Cat DVX Utility 250 Service Manual, Page 132Get this manual

2006 Arctic Cat DVX Utility 250 Service Manual, Page 132

2Remove the three machine screws securing the cover to the throttle control; then remove the cover and disengage the throttle
and secure with the two machine screws; then tighten the machine screws securely 5Fill the master cylinder reservoir with
DOT brake fluid and bleed the system (see Section 2) Throttle Control REMOVING 2Thread the throttle cable into the throttle
housing and turn the adjuster completely in; then connect the throttle cable to the throttle arm3Install the throttle housing