2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 9Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 9

1Remove the seat; then remove five screws securing the air filter housing cover ValveTappet Clearance To check and adjust
hands to remove excess solventDo not twist or wring the element or it will develop cracks5Dry the element6Put the element
in plastic bag; then pour in air filter oil and work the oil into the element7Compress the element to remove excess oil 2Remove
the breather tube from the valve cover; then remove the four cap screws and remove the valve coverAccount for the O-ring
seal and the valve cover ! CAUTION A torn air filter can cause damage to the ATV engineDirt and dust may get inside the engine
if the element is tornCarefully examine the element for tears before and after cleaning itReplace the element with new one
if it is torn 8Clean any dirt or debris from inside the air cleanerMake sure no dirt enters the carburetor9Install the air