2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 15Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 15

BHandlebar bent, cracked, and an equal and complete full-left and full-right turn capabilityCSteering post bearing assemblybearing
To adjust the drive chain, see Section 6 ! WARNING Always use the size and type of tires specifiedAlways maintain proper
tire inflation pressure SuspensionShock AbsorbersBushings The following suspension system components should be inspected
periodically to ensure proper operationAShock absorber rods bent, pitted, or damagedBRubber damper cracked, broken, or missing
TIRE INFLATION PRESSURE Front and rear tire inflation pressure should be 0.21 kg-cm2 (3.0 psi)A low-pressure gauge is provided
in the tool kit to measure the air pressure in the tiresCheck the air pressure in all tires before each use of the ATV Steering
Components The following steering components should be inspected periodically to ensure safe and proper operationAHandlebar
grips worn, broken, or loose CShock absorber body damaged, punctured, or leakingDShock absorber eyelets broken, bent, or