2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 16Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 16

4Install the lens cover NutsBoltsCap Screws Tighten all nuts, bolts, and cap screwsMake sure rivets holding components together
the Arctic Cat Engine Tachometer (pn 0644-275), start the engine and run at 4000 RPM; ignition timing should be 28 BTDC ("F"
mark)3Install the timing inspection plugIf ignition timing cannot be verified, the rotor may be damaged, the key may be sheared,
the trigger coil bracket may be bent or damaged, or the CDI unit may be faulty FrameWelds The frame and welds should be checked
periodically for damage, bends, cracks, deterioration, broken components, and missing componentsIf replacement or repair
constitutes removal, see Section 8 Electrical Connections The electrical connections should be checked periodically for proper
functionIn case of an electrical failure, check fuse, connections (for tightness, corrosion, damage), andor bulbIf an electrical
component needs to be tested for proper function, see Section 5 Brakelight Each time the ATV is used, the brakelight should