2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 51Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 51

38Inspect the transmission bearings and oil sealsReplace any worn or broken seals with new onesReplace any rough or worn
to specifications; then holding the adjuster stationary, tighten the valve adjuster jam nuts securelyRecheck the adjustment
with the thickness gauge36Install the spark plug and tighten to specifications37Install the cylinder head cover and secure
with four cap screwsTighten to specifications DSC02300 40Install the transmission cover onto the left-side crankcase; then
secure with the seven cap screwsLightly apply red Loctite #271 to the threads and tighten to specificationsNOTE: The two
longer cap screws should be located at the alignment pin positions DSC02140 DSC02289 41Fill the transmission with approximately