2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 62Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 62

2Install the slow jet NOTE: Check float arm height by inverting the carburetor freeing the float arm; then measure with
help to seat the O-ring properlyCD615 6Install the float chamber seal NOTE: Turn the pilot screw clockwise until it is lightly
seated; then turn it counterclockwise the recommended number of turns as an initial setting 4Install the idle adjustment
screw with the spring5Install the float and needle valve assembly into the carburetor; then install the float pin 7Place