2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 66Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 66

CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
4Install the gas tank cap5Install the handlebar aligning the pins in the lower clamps with the locating holes in the bottom
of the handlebarPlace the top clamps into position; then tighten the cap screws to specifications 1Place the gas tank into
position on the frame; then install the gas hoses to the fuel valve on the frame according to the tags made during removing
2Install and tighten the gas tank cap screws to specificationsNOTE: Do not over-tighten the cap screws securing the gas tank