2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 76Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 76

Reduction Gears and Driven Clutch NOTE: The enginetransmission must removed for this procedure (see Section 3)be 2Remove
1Remove the 10 mm nut securing the outer drum of the driven clutchAccount for the O-ringThe clutch will now slide off as
unit 3Remove the secondary spring seat from the outer movable sheaveRemove the two alignment pins and separate the sheavesMD1804
MD1900 MD1889 4Remove the 14 mm nut securing the countershaft sprocket to the countershaftNOTE: When removing the countershaft