2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 80Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 80

2Tighten the adjuster nut (B) on the adjusting bolt until approximately 30 mm (1.18 in of slack is present at mid-span of
proper operationAChain (excessive stretch or slack)BSprockets (excessive wearhooking, missing or broken teeth)ADJUSTING DRIVE
CHAIN 1Loosen the four cap screws (A) securing the rear axle housing to the rear swing armMD2357 2Remove the link plate and
link noting the position of the O-rings; then remove the chain INSTALLING DRIVE CHAIN 1Place the drive chain into position