2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 86Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 86

2Inspect all threads for stripping or damage Front Hub REMOVING HUB 3Inspect the brake shoes for excessive wear or gouges4Inspect
2Drive out the inner and outer bearingsAccount for spacer 3Remove the castle nut securing the hubAccount for washer MD2384A
3Repeat procedure for the other hubMD2133 4Remove the hub assemblyAccount for outer hub spacer5Repeat procedure for other
hubCLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
INSTALLING HUB BEARINGS AND SEALS 1Lightly lubricate the bearings with bearing grease; then using plastic mallet and bearing