2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 91Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 91

3Slide brake backing plate assembly off the spindle shaft and secure it out of the way4Remove the cotter pin from the outer
the rubber spindle pin boot; then remove the cotter pin and flanged castle nut from the spindle pinLower the steering knuckle
assembly from the A-arm CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way,
replacement is necessary 1Clean all A-arm components in parts-cleaning solventMD2113 7Remove the cap screw and self-locking