2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 95Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 95

Wheels and Tires TIRE SIZE ! WARNING Use only Arctic Cat approved tires when replacing tiresFailure to do so could result
ATV and could cause excessive drive train damage not covered by warrantyKM229 11Install the wheels and tighten the cap screws
to specifications; then remove the ATV from the support stand TIRE INFLATION PRESSURE Front and rear tire inflation pressure
should be 0.21 kg-cm2 (3.0 psi) ! WARNING After removing and installing of components that are brake-related, ALWAYS check
and adjust brakes as necessary before operating the ATV ! WARNING Always maintain proper tire inflation pressure REMOVING
1Secure the ATV on support stand to elevate the wheels ! WARNING Make sure the ATV is solidly supported on the support stand