2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 99Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 99

4Disconnect the handlebar switch assembly and brake switch connectors; then route them through the metal loop on the steering
nuts, the outer bearing cap, and the two-piece plastic bearingNOTE: The inner bearing cap and the two spacers do not need
to be removed 6Remove the gas tank cap and lift off the panel 7Remove the cotter pins; then remove the two inner tie rod
ends from the steering post CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way,