2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 103Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 103

9Remove the A-arm 2Secure the shock absorber to the A-arm with the cap screw and self-locking nutTighten the nut to specifications
for cracks or damage5Inspect the frame mounts for signs of damage or wearINSTALLING NOTE: During installing, new cotter pins
should be used 3Lubricate the steering knuckle assembly with grease; then install it into the A-arm and secure with the flanged
castle nutTighten the nut to specifications; then install new cotter pin and the rubber spindle pin boot 1Lubricate the A-arm
bushings with grease; then install the A-arm into the frameInstall the caps screws and self-locking nutsTighten the nuts