2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 109Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 109

7Place suitable container under the master cylinder and compress the lever slowlyBrake fluid should flow from the loose connection8Tighten
NOTE: Before installing handlebar grip, use contact spray or alcohol to clean the inside of the grip and the handlebar of
adhesive residue, oil, or any other contaminant 9Apply liberal amount of Handlebar Grip Adhesive (pn 0636-071) to the inside
of the grip; then slide the right grip onto the handlebarWipe off any excess adhesive10Tighten the right brake lever assembly
Allen-head cap screw (from step 1) securely 5Install the brakeline hose on the master cylinder with the brakeline hose bolt