2007 Arctic Cat 700 Diesel ATV Service Manual, Page 3Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 3

General Specifications FUEL INJECTION Type Idle RPM (engine warm) Throttle Cable Free-Play (at lever) Glow Plug Type Alternator
normal operating temperatureDo not idle the engine for excessively long periods of timeDuring the break-in period, maximum
of 12 throttle is recommended; however, brief full-throttle accelerations and variations in driving speeds contribute to
good engine break-inDuring the break-in period (or whenever the brake pads are replaced), the hydraulic brake pads must be
burnishedSlow disc-speed hydraulic brakes must be properly burnished in order to achieve maximum stopping power ELECTRICAL
Lombardini Denso 12V40 Amp CHASSIS Hydraulic wBrake Lever Lock and Auxiliary Brake Front25 8-12 Rear25 10-12 0.35 kgcm (5
psi) MISCELLANY 20.81 (5.5 U.Sgal 5.6 (5.9 U.Sqt) 275 ml (9.3 fl oz) 250 ml (8.5 fl oz) 2.0 (2.1 U.Sqt) 1.9 (2.0 U.Sqt) 600
ml (20.3 fl oz) Biodiesel Blend up to 20 (B20)42-50 Cetane Diesel #1 or #2JP or JP Turbine SAE 10W-40 SAE Approved 80W-90
Hypoid SAE Approved 80W-90 Hypoid 31.25 mm (1.23 in DOT 12V8W27W 12V27W (2) ! CAUTION BRAKE PADS MUST BE BURNISHED TO ACHIEVE