2007 Arctic Cat 700 Diesel ATV Service Manual, Page 17Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 17

738-420A NOTE: During the bleeding procedure, watch the reservoir sight glass very closely to make sure there is always sufficient
compress the brake lever several timesCRemove the protective cap, install one end of clear hose onto one FRONT bleeder screw,
and direct the other end into container; then while holding slight pressure on the brake lever, open the bleeder screw and
watch for air bubblesClose the bleeder screw before releasing the brake leverRepeat this procedure until no air bubbles are
present ! CAUTION This hydraulic brake system is designed to use DOT brake fluid onlyIf brake fluid must be added, care must
be taken as brake fluid is very corrosive to painted surfaces INSPECTING HOSES Carefully inspect the hydraulic brake hoses
for cracks or other damageIf found, the brake hoses must be replacedCHECKINGREPLACING PADS The clearance between the brake
pads and brake discs is adjusted automatically as the brake pads wearThe only maintenance that is required is replacement