2007 Arctic Cat 700 Diesel ATV Service Manual, Page 18Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 18

Burnishing Brake Pads Brake pads (both hydraulic and auxiliary) must be burnished to achieve full braking effectivenessBraking
pedal is depressed Coolant The cooling system should be inspected daily for leakage and damageAlso, the coolant level should
be checked periodicallyWhen filling the cooling system, use coolantwater mixture which will satisfy the coldest anticipated
weather conditions of the area in accordance with the coolant manufacturer's recommendationsWhile the cooling system is being
filled, air may become trapped; therefore, elevate the rear of the ATV 30-40 cm (12-16 in to allow air to bleed from the
filler neckRun the engine for several minutes; then shut off the engine and fill with coolant to the top of the filler neckNOTE:
Use good quality, biodegradable glycol-based, automotive-type antifreeze CInstall the new brake padsDSecure the caliper to
the knuckle andor axle housing with the cap screwsTighten to specifications (see Section 10) ! WARNING Never check the coolant