2007 Arctic Cat 700 Diesel ATV Service Manual, Page 20Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 20

5Using block of wood and mallet, drive the V-belt down between the sheaves of the driven pulley approximately one inch; then
the V-belt together near its center and slide the movable drive face onto the drive hubSecure the drive face with nutTighten
the nut to specifications (see Section 10) DE483 DE488 NOTE: The diesel engine in this ATV rotates counterclockwise as viewed
from the right side; therefore, if directional arrows are printed on the V-belt, they must be directed rearward NOTE: At
this point, the wedge can be removed from between the driven pulley faces 4Rotate the V-belt and pulley until the V-belt