2007 Arctic Cat 700 Diesel ATV Service Manual, Page 25Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 25

Removing Engine Transmission Many service procedures can be performed without removing the enginetransmission from the frameClosely
2)4From the left side, remove the E-clip from the shift arm; then disconnect the shift linkage from the shift armAccount
for bushing and washer6Loosen the two hose clamps securing the air diverter to the inlet hoses; then remove the air diverter7Remove
the upper radiator hose from the filler neck; then loosen the hose clamp securing the filler neck to the thermostat housing
and remove the filler neck DE073A DE064A 5Disconnect the speed sensor connector from the speed sensor; then remove the cap
screw securing the engine and main harness ground to the transmission NOTE: Filler neck can remain attached to the overflow
recovery hose 8Remove the upper radiator hose from the radiator9Remove the four cap screws securing the air filter housing