2007 Arctic Cat 700 Diesel ATV Service Manual, Page 42Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 42

AT THIS POINT If the cylinder head has been removed, no more components may be installed prior to installation on the engine
installed in their respective injectors 13Using crisscross pattern, tighten the Allen-head cap screws to specifications;
then tighten the two "tamper-proof" torx-head cap screws to specificationsDE529 14Connect the fuel hoses to the fuel rail;
then connect the crankcase breather hose 9Rotate the camshaft until the camshaft lobes are facing away from the rocker arms;
then secure the rocker arm support with the flat washers and nutsTighten to specifications 15Connect the oil pressure switch
connector to the oil pressure switch 10Install the timing belt (see Left-Side Components in this section)3-20 16Install the