2007 Arctic Cat 700 Diesel ATV Service Manual, Page 45Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 45

3Measure the injector nozzle protrusion (A)Measurement should be 6.80-7.05 mm (0.268-0.277 inExcessive protrusion may be
the double ribs are directed toward the injector tip; then install the copper washer on the injector 4Clean the fire ring
sealing surface in the cylinder head taking care not to damage the pre-combustion cup ring nut 5Clean the fire ring sealing
surface on the injector tip taking care not to damage the injector tip NOTE: small amount of lithium grease applied to the