2007 Arctic Cat 700 Diesel ATV Service Manual, Page 49Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 49

8Rotate the crankshaft clockwise 180 and repeat steps 5-7 on the other cylinder AT THIS POINT If engine is being assembled,
the air filter assembly and secure with the existing hardwareTighten securely11Install the front body panel; then install
the front rack and splash panels (see Section 8)STATIC INJECTOR TIMING To set static injector timing, use the following procedure1Remove
the valve cover and fuel rail (see Unit Injectors in this sub-section)2Install the Timing Fuel Block (pn 0444-234) on the
injector using the eccentric gasket over the check valve in place of the O-ring 4Rotate the engine in the direction of rotation