2007 Arctic Cat 700 Diesel ATV Service Manual, Page 55Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 55

Assembling Valves 1Thoroughly clean all valve components in parts-cleaning solvent; then dry with compressed air ! WARNING
of discoloration, cracks, or loose fit in cylinder head as well as clean, even contact areaReplace any valve seats that show
evidence of excessive wear or damage10Check the cylinder head for cracks, loose rocker arm studs, or loose injector hold-down
studsIf cylinder head is cracked, it must be replacedServicing ValvesValve GuidesValve Seats If valves, valve guides, or
valve seats require servicing or replacement, Arctic Cat recommends that the components be taken to qualified machine shop
for servicing 3Apply clean engine oil to valve stems and valve guides; then install the valves into the same port they were
removed from 4Place spring seat, valve spring, and spring cap into position; then using suitable valve spring compressor,
compress the spring and install the valve keepers onto the valve stem ! CAUTION If valves are discolored or pitted or if