2007 Arctic Cat 700 Diesel ATV Service Manual, Page 57Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 57

5Remove the pre-combustion alignment tool and repeat steps 2-5 for the second pre-combustion chamber; then install the glow
use the following procedureARotate the crankshaft until one of the pistons is at top-dead-center (TDC) as indicated by dial
indicator CUse steps and to measure and record piston protrusion on the other pistonDUse the piston with the highest protrusion
to select the appropriate gasket from the following chartPiston Protrusion Gasket Thickness 0.82-0.91 mm (0.032-0.036 in
0.92-1.01 mm (0.036-0.040 in 1.02-1.10 mm (0.040-0.043 in 1.56-1.64 mm (0.061-0.065 in 1.66-1.74 mm (0.065-0.069 in 1.76-1.84
mm (0.069-0.072 in Hole Number BUsing depth micrometer, measure and record piston protrusion above the cylinder deck planeDE343A