2007 Arctic Cat 700 Diesel ATV Service Manual, Page 60Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 60

8Rotate the engine in the direction of rotation (clockwise facing the timing belt) until the reference mark (A) on the camshaft
then loosen the belt and remove from the engine 3Inspect the timing belt cover for cracks, seal damage, or signs of oil leakageIf
oil is present, locate and repair any leaksThoroughly clean all oil from the timing belt cover and pulleysInstalling 1Check
that the reference mark (C) on the timing belt drive pulley is aligned with the reference mark (D) on the oil pump housing
and the reference mark (A) on the camshaft drive pulley is aligned with the reference mark (B) on the cylinder headNOTE:
If the camshaft or crankshaft has been rotated, use the following procedure to safely realign the reference marks ! CAUTION