2007 Arctic Cat 700 Diesel ATV Service Manual, Page 62Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 62

7Install the four cap screws and finger tighten; then install the holding tool 11Connect the shift linkage to the shift
pump is not serviceable componentIf it is defective, it must be replaced as an assembly 8Apply Loctite #243 to the crankshaft
pulley retaining cap screw and tighten to specifications Installing 1Make sure all mating surfaces are free of any gasket
material, sealant, or residueDE212 9Tighten the four cap screws from step to specifications10Install the alternator belt
and tighten so that 10 kg (22 lb) of force at the belt midpoint results in 10-15 mm (0.4-0.6 in of deflection; then tighten
the mounting cap screws securely 2Using new gasket, install the water pump onto the engine and secure with the four cap screwsTighten