2007 Arctic Cat 700 Diesel ATV Service Manual, Page 74Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 74

Assembling Countershaft 1Place the thrust washer on the splined end of the countershaft; then install the low driven gear
thread bores, and plug openings to remove any metal filings or dirt accumulationsDE158B 2Install the low driven gear onto
the bearing with the shift dog slots directed toward the fine-splined section of the countershaft; then secure with splined
washer and lock washer 13Clean all parts to be used for assembling in parts-cleaning solvent; then dry with compressed air