2007 Arctic Cat 700 Diesel ATV Service Manual, Page 80Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 80

Center Components NOTE: This procedure cannot be done with the engine in the frameComplete Removing procedures for Top-Side,
(see Removing EngineTransmission in this section)2Separate the transmission and V-belt housing from the engine (see Right-Side
Components in this section)3Remove the timing belt (see Left-Side Components in this section)4Remove the cylinder head assembly
(see Left-Side Components in this section)5Remove the oil pump assembly (see Left-Side Components in this section)6Remove
the cap screws securing the oil pan assembly; then remove the oil pan assemblyAccount for two O-rings and gasket BUsing depth
micrometer, measure and record piston protrusion above the cylinder deck plane DE386 DE332A 7Remove the four cap screws securing